Interval Timer (Tabata and HIIT)
Set work periods, rest periods, and rounds to structure a timed workout and see how the intervals add up.
Get ready
About this interval timer
Use this interval timer to set work and rest periods, choose the number of rounds, and run a timed session for Tabata, HIIT, or circuit training. You choose the intervals; the tool helps keep their sequence clear. NIST describes a clock as measuring intervals—the durations between events—so your session length depends on the durations you set and whether a final rest is included.
How to use it
- Enter the work duration and rest duration in the fields provided.
- Choose how many rounds you want to complete.
- Review the sequence and check whether the last round includes a rest.
- Start the timer and follow each work and rest signal.
- If the page or device is interrupted, check the display before continuing.
Set up your intervals
Choose a work duration, a rest duration, and a round count that fit the session you have planned. You can use the same pattern for each round, or adjust the settings between sessions to create a different structure. The timer organizes the sequence; it does not decide which durations are appropriate for you.
For example, set 40 seconds of work and 20 seconds of rest for 8 rounds. If each round includes both periods, the arithmetic is 8 × (40 + 20) = 480 seconds, or 8 minutes. If the timer ends immediately after the final work period, the total is 8 × 40 + 7 × 20 = 460 seconds, or 7 minutes 40 seconds. Check how the final rest is handled when estimating your finish time.
For a separate calculation, use the duration calculator. A general timer can count down a single duration, while this tool is for repeating work-and-rest sequences.
Understand the timing sequence
A round is one pass through the work-and-rest pattern. The timer’s signals mark the transition between periods, but the planned interval and the amount of active work are different things: in the example above, only 40 seconds of each 60-second round is work time.
| What is counted | Calculation | Total |
|---|---|---|
| Work only | 8 × 40 seconds | 320 seconds |
| Work and rest, including final rest | 8 × 60 seconds | 480 seconds |
| Work and rests between rounds | 320 + (7 × 20 seconds) | 460 seconds |
Use the display and its labels to confirm whether a transition starts work or rest. If you need to measure an unscripted effort instead, a stopwatch may be a better fit.
Timing, interruptions, and accuracy
For repeatable results, enter durations consistently and start the session when you are ready. If you leave the page, lock your device, or the browser suspends the tab, do not assume the signals stayed on schedule. Check the display before resuming; restart the sequence if you are unsure which interval is active.
Digital timekeeping counts repeating events: NIST notes that one cycle per second is one hertz. The SI second is defined using 9,192,631,770 cycles of radiation associated with cesium atoms. Those standards explain how time is defined, but they do not mean a browser-based workout timer is a precision measurement instrument. NIST also describes comparing timers with a traceable audio time source when calibration is needed. For everyday training, use the on-screen timing as a guide and allow for interruptions or delayed signals.
For a single focused work block rather than alternating rounds, try a Pomodoro timer. To check the elapsed time between two clock readings, use the duration calculator.
Questions people ask
How do I calculate the total interval time?
Multiply the number of rounds by the combined work and rest durations if every round includes rest. If the last rest is omitted, count one fewer rest period. For 8 rounds of 40 seconds work and 20 seconds rest, that is either 480 seconds with the final rest or 460 seconds without it.
Does the final round include a rest?
That depends on how the timer is configured. Some interval sequences end after the final work period; others include a final rest. Check the sequence or the timer’s display before starting, especially if you are planning around a specific finish time.
Can I use the interval timer for circuit training?
Yes. Set the work period for each station and the rest period for the transition or recovery you want, then choose the number of rounds. If stations need different durations, check whether the available controls let you change intervals during setup; otherwise, run separate timed sequences.
What if my browser tab or device is interrupted?
Check the timer before continuing rather than guessing which interval is active. A suspended page or device may not give signals when you expect them. If you cannot confirm the sequence, restart the timer so your next work and rest periods are clear.
Sources
- Second: Introduction, NIST
- Timekeeping and clocks FAQs, NIST
Edited by Leo, editor of WhatTimeIsIt.blog
Calculations on this page run in your browser using the IANA time zone database and standard calendar rules. Facts are checked against the government agency, standards body or official source linked in the text. Last reviewed November 10, 2026. See the editorial policy or report an error to hello@whattimeisit.blog.